Water is escaping from a pipe or fitting
Close the fixture valve or indoor main shutoff only if you recognize it and can reach it safely. Do not force a stuck valve. Tell us whether closing it actually stops the flow.
Need a Repentigny plumber for an active leak, a drain backing up or a repair you can plan? Plomberie Anjou takes emergency calls 24/7 as well as requests for scheduled work. Tell us what the water is doing, where the problem appears and which parts of the building are accessible.

Water still flowing from a pipe or wastewater coming back through a drain calls for a phone conversation. Tell us whether the water seems to come from the supply or the drainage system, and whether one fixture or several parts of the building are affected.
Close the fixture valve or indoor main shutoff only if you recognize it and can reach it safely. Do not force a stuck valve. Tell us whether closing it actually stops the flow.
Stop using fixtures that send more water into the drain and avoid contact with wastewater. Note where it first came up, whether other fixtures are affected and when the problem began.
If water reaches electrical equipment, stay out of the wet area. Do not cross standing water to reach the electrical panel. Follow Hydro-Québec’s English-language electrical safety guidance. Call 911 if you are in immediate danger.
A valve that leaks, turns without closing or no longer stops the water completely can complicate a repair. The plumber checks its condition and access to the supply line. If the outside service shutoff is needed, coordinate the municipal procedure with the plumbing work.
A damp fitting, a clogged sink and a shortage of hot water call for different checks. We start with the symptom and available access to identify the appropriate plumbing service.
You do not need to choose a technical method before calling. Tell us which fixtures are affected and what has already been tried.
Water around a tap, a dripping connection or a stain on the ceiling? The source needs to be identified before repairing the affected section. Note whether the leak is constant or appears only when a fixture is used.
A clog affecting only one sink may be in a branch line. Water backing up at several fixtures can point to a broader drainage problem. The symptoms and available access guide the unclogging work.
If a clog keeps returning or the sewer line needs to be documented, a camera inspection can show conditions in the accessible part of the pipe. It does not clear a blockage, and its usefulness depends on visibility inside the line.
For planned replacement, provide the tank capacity and a photo of its rating plate. If water is collecting at the base, call to describe the leak and how the supply can be shut off.
The City emphasizes keeping backwater valves accessible for inspection and maintenance. If you are redoing a basement floor or finishing a room, preserve the relevant access points and have the arrangement assessed before covering them.
When backwater valves close during a sewer surcharge, water used in the home can also be held back. The City advises reducing water use in that situation. A backwater valve does not stop every type of water intrusion; first establish where the water is entering.
Do not dismantle the device during a backup. Its location, condition and the fixtures it protects need to be checked against the actual plumbing layout.
Replacing a fixture in place and moving it to a new position take different preparation. Plumbing repairs in Repentigny and planned changes become clearer when you know the intended layout, the available pipe access and any municipal steps that apply.
Include the address, building type, equipment to repair or replace and who will be on site. A wide photo can show access, while a close-up may show the fitting or equipment label.
The price depends on the work found on site, parts, time and access. A photograph may help prepare a visit but cannot always define the full scope.
Before adding or rearranging plumbing fixtures, consult the City’s permit and work-declaration page. Do not assume an interior change is automatically exempt.
A fixture staying in the same place, a drain being moved and a new supply line each have a different scope. Share the plan before walls are closed or fixtures are ordered.
Published customer reviews can help you learn about the company before requesting a visit.
Describe what you observe and which access points you know about. This helps prepare the visit; the diagnosis depends on the installation found on site.
First tell the plumber what the valve does and whether water is actively leaking. If the outside service needs to be shut off, that step must be coordinated with Repentigny. For a planned shutoff, the City calls for a fee at the permit counter and an appointment with Public Works. If a leak is active, call rather than waiting for a form response.
Not necessarily. Note whether all taps are affected, only one fixture has a problem or only the hot water is weak. Check municipal notices and report any visible leak. The City distinguishes a localized issue from one that may require a check of the meter or service box.
Keep an opening that allows inspection and maintenance. Have the device and nearby lines located before finishing the floor. Do not choose a new access-cover location before confirming where the valve actually sits.
No. Unclogging may be the useful first step. A camera addresses a specific question, such as why a blockage keeps returning or what can be seen inside an accessible line. Mention past blockages and previous work.
Yes. Give the full address in Repentigny or Le Gardeur, describe the symptom and leave a callback number. For an urgent situation, call 514 312-1521 to discuss the problem and available service.
For a request outside Repentigny, see our North Shore plumbing coverage. Always provide the city and building address when you first contact us.