Water keeps running
Water flowing into the bowl, or a tank that refills without a flush, may point to the flapper, fill valve or water level adjustment.
Toilet repair may be enough if the rest of the fixture is sound.
Toilets, sinks and faucets
Toilet Installation and Plumbing Fixture Services
Is your toilet rocking, refilling by itself or due for replacement? Is a bathroom sink or faucet leaking? Plomberie Anjou handles toilet installation, repair and replacement, along with other plumbing fixtures, according to the condition of the existing connections and the space available.
Serving Anjou and Greater Montréal. If the toilet is overflowing or water is actively leaking, mention that when you call.
RepairThe tank keeps runningThe bowl and tank may still be in good condition.
ReplaceThe toilet leaks or rocksThe base, floor flange and surrounding floor need a closer look.
InstallA new fixture is plannedIts dimensions must work with the space and connections.
Before deciding
Repair the toilet or replace it?
A running tank, water at the base of the bowl and cracked porcelain call for different work. Checking the cause first helps determine whether to replace a part, reset the toilet or choose a new fixture.
The bowl moves or the floor is wet
The mounting and seal at the base need checking. Once the toilet is lifted, the condition of the flange and floor may change the scope of a replacement.
Avoid using the fixture if water appears around the base.
You want a different toilet
A toilet replacement in the same location requires a check of the dimensions, drain position, shutoff valve and room for the new bowl.
Adding or moving a toilet is a larger project than a direct swap.
Choosing a model
Toilet installation: what to check before the new fixture goes in
Bowl shape and height matter, but the toilet must also fit the existing plumbing and room layout. Before buying a replacement, photos of the current toilet, shutoff valve and floor area can help frame the request. Measurements and connection conditions still need to be confirmed on site.
If you already have a model in mind, include its make and model number. That helps clarify the installation and any required parts without assuming the old setup will fit the new fixture.
What affects the installation
Four checks for a toilet
- 1Rough-in distance. Measure from the finished wall to the centre of the floor drain or mounting bolts and compare it with the chosen model.
- 2Water supply. The shutoff valve and supply line must be accessible and able to isolate the fixture for the work.
- 3Flange and floor. A damaged flange, unstable support or signs of moisture need attention before resetting the bowl.
- 4Clearance. Bowl shape, the door swing and access for future maintenance matter in a small bathroom.
American Standard explains how to check the rough-in distance and surrounding clearance before choosing a replacement. Québec’s RBQ also discusses access to plumbing fixtures and components in its guidance (in French).
Beyond the toilet
Bathroom sinks, kitchen sinks, faucets, tubs and showers
Plumbing fixture installation involves more than setting the visible appliance in place. Mounting, supply lines, the trap and drainage need to suit the room’s existing configuration.
Bathroom and kitchen sinks
Replacing a sink and connecting its faucet, water supply and drain. A leak under the cabinet may call for a targeted leak repair rather than a whole new fixture.
Faucets and shutoffs
Installing or replacing accessible faucets, connections and shutoff valves according to their condition. In a multi-unit building, access to the right water shutoff needs to be planned before work begins.
Tubs and showers
Connections and faucets for a replacement or bathroom project. When fixture locations change or pipes need to be rerouted, the scope belongs with renovation plumbing.
The RBQ explains why water shutoffs in residential buildings (in French) matter when isolating a fixture for repairs.
Anjou and Greater Montréal
Replace a fixture in place or move it?
In an existing bathroom, replacing a toilet in the same spot is a different scope from adding a second toilet or moving a sink. A new location can require changes to the water supply, drainage and access, along with other renovation work.
Plomberie Anjou serves Montréal, the North Shore and the South Shore. Tell us the location and whether the fixture will stay in place so the next step can be based on your project.
Preparing your request
Useful details to share at the start
The fixture and its symptoms help establish the likely scope. A few details or photos can distinguish a small repair from work that changes the plumbing layout.
1
Identify the fixture
Toilet, bathroom sink, kitchen sink or faucet. Tell us if you have already purchased the new item and whether it will remain in the same location.
2
Describe the problem
A tank leak, water on the floor, a rocking bowl or a shutoff that will not close each calls for different checks.
3
Confirm the work
The connections and access are assessed before the repair or installation; the water supply and drainage are checked after the work.
Customer reviews
What customers have shared
The modules below display comments published on our profiles. You can read the reviews directly in their source.
Frequently asked questions
Before a toilet installation or repair
Every bathroom has its own constraints. These answers can help you describe the job before choosing a fixture or replacement part.
Does a constantly running toilet need replacement?
Not necessarily. The fill valve, flapper or water level may be the cause. If the porcelain, base and connections are sound, a focused repair may be possible after inspection.
What should I do if water appears around the toilet base?
Avoid using the toilet and close its shutoff valve if it is accessible and works. Water at the base or a rocking bowl calls for a check of the mounting, seal, flange and floor. If the valve will not close, call to arrange a safe water shutoff.
I already bought a toilet. What information should I send?
Send the make and model along with a photo of the existing installation. The rough-in distance, available space and connections need to be checked before installation; additional parts may be required.
Do I need a permit to move a toilet in Anjou?
Anjou says a permit is required when a plumbing fixture is moved or added. A direct replacement and a change to the bathroom layout therefore need different planning. Check the borough’s guidance (in French) for your project.
What is involved in a direct toilet replacement?
The scope depends on the existing fixture and what is found on site. Removing the old toilet, securing and connecting the new model, and checking its operation are part of the work to plan. A damaged flange, failed shutoff or water-affected floor may require additional work.
Your bathroom
A toilet to repair or a fixture to install?
Tell us which fixture is involved, where it sits and what is not working. We can identify the next step for your situation.